SENSOR-INT-01-REM
Remote Control for Internal Sensor
The DIM and ON/OFF Remote Controls provide convenient wireless programming of compatible occupancy sensors, enabling quick adjustment of detection range, hold time, daylight sensing, and lighting settings for simplified commissioning and enhanced control.
Features:
- Compatible with DIM and ON/OFF occupancy sensors
- Wireless sensor programming and configuration
- Adjustable detection range settings
- Customisable hold time and daylight threshold
- Supports single or multiple sensor setup
- DIM model features manual brightness and standby dimming control
- Memory and Apply functions for rapid multi-sensor programming (DIM model)
- Test mode for quick commissioning and sensor verification
- Simple On/Off and Auto Mode operation
- Ideal for commercial and residential sensor lighting systems
Specifications
Variant Description
ON/OFF Setup Remote
DIM SENSOR Setup Remote
ON/OFF
“ON/OFF” key only functions as a switch of the light.
If you press this button to turn off the lamp before the power to the light is turned off, the lamp will remain off after power-on again.
Auto Mode
No
Press “Auto Mode” button, the sensor will start to work and all the settings will remain the same before the light gets switched on/off.
Reset
100% detection range, hold time 5S, daylight sensor disabled
Press “Reset” button, change brightness to max level.
Press “Reset” button, products with DIP switch will be controlled by DIP switches; otherwise all the setting will be just
initial, that is 100% detection range,hold time SS, no stand-by time and daylight threshold disabled.initial, that is 100% detection range,hold time SS, no stand-by time and daylight threshold disabled.
+/-
No
To adjust brightness 10-100% in on/off mode. To adjust highest brightenss 60-100% in sensor mode.
Start
No
Press “Start” to customize scene, users can change detection range, daylight threshold, holdtime, standby dimming level and standby period.
Memory
No
Press “Memory” to save all the settings. Apply
Apply
Press “Apply” to deliver the saved setting.
Press “Apply” without “memory”will make all the setting one-time operation.
Settings should be done within 30S, otherwise it exits memory mode.
Variants
| Image | Variant ID | Item No. | Variant Description | ON/OFF | Auto Mode | Reset | +/- | Start | Memory |
|---|---|---|---|---|---|---|---|---|---|
|
|
66090 | SENSOR-INT-01-REM | ON/OFF Setup Remote | “ON/OFF” key only functions as a switch of the light. If you press this button to turn off the lamp before the power to the light is turned off, the lamp will remain off after power-on again. | No | 100% detection range, hold time 5S, daylight sensor disabled | No | No | No |
|
|
66091 | SENSOR-INT-01-REM | DIM SENSOR Setup Remote | “ON/OFF” key only functions as a switch of the light. If you press this button to turn off the lamp before the power to the light is turned off, the lamp will remain off after power-on again. | Press “Auto Mode” button, the sensor will start to work and all the settings will remain the same before the light gets switched on/off. | Press “Reset” button, change brightness to max level. Press “Reset” button, products with DIP switch will be controlled by DIP switches; otherwise all the setting will be just initial, that is 100% detection range,hold time SS, no stand-by time and daylight threshold disabled.initial, that is 100% detection range,hold time SS, no stand-by time and daylight threshold disabled. | To adjust brightness 10-100% in on/off mode. To adjust highest brightenss 60-100% in sensor mode. | Press “Start” to customize scene, users can change detection range, daylight threshold, holdtime, standby dimming level and standby period. | Press “Memory” to save all the settings. Apply |
Image
Variant ID
66090
Item No.
SENSOR-INT-01-REM
Variant Description
ON/OFF Setup Remote
ON/OFF
“ON/OFF” key only functions as a switch of the light.
If you press this button to turn off the lamp before the power to the light is turned off, the lamp will remain off after power-on again.
Auto Mode
No
Reset
100% detection range, hold time 5S, daylight sensor disabled
+/-
No
Start
No
Memory
No
Image
Variant ID
66091
Item No.
SENSOR-INT-01-REM
Variant Description
DIM SENSOR Setup Remote
ON/OFF
“ON/OFF” key only functions as a switch of the light.
If you press this button to turn off the lamp before the power to the light is turned off, the lamp will remain off after power-on again.
Auto Mode
Press “Auto Mode” button, the sensor will start to work and all the settings will remain the same before the light gets switched on/off.
Reset
Press “Reset” button, change brightness to max level.
Press “Reset” button, products with DIP switch will be controlled by DIP switches; otherwise all the setting will be just
initial, that is 100% detection range,hold time SS, no stand-by time and daylight threshold disabled.initial, that is 100% detection range,hold time SS, no stand-by time and daylight threshold disabled.
+/-
To adjust brightness 10-100% in on/off mode. To adjust highest brightenss 60-100% in sensor mode.
Start
Press “Start” to customize scene, users can change detection range, daylight threshold, holdtime, standby dimming level and standby period.
Memory
Press “Memory” to save all the settings. Apply
